 Vanguard News Network Forum Elliptical Transfer Orbits: Non-Hohmann Transfer Orbits that Take You Somewhere September 13th, 2020 #1
Jerry Abbott
Senior Member

Join Date: Nov 2007
Location: In the hills north of Hillsboro WV
Posts: 996  Elliptical Transfer Orbits: Non-Hohmann Transfer Orbits that Take You Somewhere

Elliptical Transfer Orbits

Non-Hohmann Transfer Orbits that Take You Somewhere

Most of the time, when someone speaks of transfer orbits, he's referring to a special case known as a Hohmann transfer orbit. Hohmann transfer orbits have a departure occurring at one of its apsides (perihelion or aphelion) and an arrival occurring at the other apside. Thus, I could describe Hohmann transfer orbits as transfer orbits having two anchored apsides.

In this essay, I will treat a more general case of transfer orbits that have only one anchored apside, which turns out to be enough to close the equation set and permit the Keplerian elements of the transfer orbit to be found, as well as the changes of velocity required for transfer orbit insertion and, later, for matching velocity with the destination object.

In what follows, the following example problem will be used for illustration:

A spaceship is initially in Earth's orbit, but is on the opposite side of the sun from Earth. Its captain wants to enter a transfer orbit, bound for Vesta, at 12h UT on 26 June 2017. The navigator does some trial runs on a computer and discovers an elliptical transfer orbit having its aphelion at Vesta upon arrival at 4h 45m 36.036s UT on 12 June 2018. Check the navigator's work to ensure that an elliptical transfer orbit does exist for these times for departure and arrival. Show the elements of the transfer orbit and the delta-vees required for transfer orbit insertion (departure) and for matching velocity with Vesta at arrival.

Spaceship initial orbit

a = 1.000002 AU
e = 0.016711
i = 0.0°
Ω = 0.0°
ω = 103.095°
T = JD 2454285.96

Vesta's orbital elements

a = 2.36126914 AU
e = 0.089054753
i = 7.13518389°
Ω = 103.91484282°
ω = 149.85540185°
T = JD 2454267.1969204

Departure time,
t₁ = 12h UTC, 26 June 2017

Arrival time,
t₂ = 4h 45m 36.036s UTC, 12 June 2018

It is convenient to convert t₁ and t₂ from calendar date format to Julian date format.

Quote:
 Converting from Calendar Date to Julian Date After Fliegel and van Flandern (1968) The time zone must be Greenwich, Zulu, UT, UTC (all the same zone) Y = the four-digit year M = the month of the year (1=January... 12=December) D = the day of the month Q = the time of the day in decimal hours A = integer [ (M−14) / 12 ] B = integer { [ 1461 (Y + 4800 + A) ] / 4 } C = integer { [ 367 (M − 2 − 12A) ] / 12 } E = integer [ (Y + 4900 + A) / 100 ] F = integer [ (3E) / 4 ] t = B + C − F + D − 32075.5 + Q/24
Converting the time of departure, t₁, from calendar date to Julian date

t₁ = 12h UTC, 26 June 2017
Y = 2017
M = 6
D = 26
Q = 12
A = 0
B = 2489909
C = 122
E = 69
F = 51
t₁ = JD 2457931.0

Converting the time of arrival, t₂, from calendar date to Julian date

t₂ = 4h 45m 36.036s UTC, 12 June 2018
Y = 2018
M = 6
D = 12
Q = 4.76001
A = 0
B = 2490274
C = 122
E = 69
F = 51
t₂ = JD 2458281.69833375

Instead of having the initial position vectors given to us, we must calculate them by reducing the elements of the spaceship's initial orbit (around the sun) and the time of departure therefrom, t₁, in order to obtain the position vector r₁, and by reducing the elements of Vesta's orbit and the time of arrival thereto, t₂, in order to obtain the position vector r₂.

For what passes below, the Sun's gravitational parameter,
GM = 1.32712440018ᴇ20 m³ sec⁻²

The ratio of the astronomical unit to the meter,
AU = 1.495978707ᴇ11 m au⁻¹

And the...

Quote:
 Definition of the two-dimensional arctangent function atn(z) = single argument arctangent function of the argument z. Function arctan( y , x ) . if x = 0 and y greater than 0 then angle = +π/2 . if x = 0 and y = 0 then angle = 0 . if x = 0 and y less than 0 then angle = −π/2 . if x greater than 0 and y greater than 0 then angle = atn(y/x) . if x less than 0 then angle = atn(y/x) + π . if x greater than 0 and y less than 0 then angle = atn(y/x) + 2π arctan = angle
Unless otherwise indicated, the coordinate system to which all unprimed vectors in this essay refer is ecliptic coordinates  heliocentric for position, and sun-relative for velocity.

Reducing Keplerian orbital elements and a time to position and velocity in heliocentric ecliptic coordinates

Find the period, P, in days.

P = (365.256898326 days) a¹·⁵

Find the mean anomaly, m, in radians.

m₀ = (t − T) / P
m = 2π [ m₀ − integer(m₀) ]

Find the eccentric anomaly, u, in radians.

The Danby first approximation for the eccentric anomaly, u, in radians.
(After P.M. Danby)

u' = m + (e − e³/8 + e⁵/192) sin(m) + (e²/2 − e⁴/6) sin(2m) + (3e³/8 − 27e⁵/128) sin(3m) + (e⁴/3) sin(4m)

The Danby's method refinement for the eccentric anomaly.

u = u'

REPEAT
U = u
F₀ = U − e sin U − m
F₁ = 1 − e cos U
F₂ = e sin U
F₃ = e cos U
D₁ = −F₀ / F₁
D₂ = −F₀ / [ F₁ + D₁F₂/2 ]
D₃ = −F₀ / [ F₁ + D₁F₂/2 + D₂²F₃/6 ]
u = U + D₃
UNTIL |u−U| is less than 1ᴇ-14

The loop, just above, converges u to the correct value of the eccentric anomaly. Usually. However, when e is near one and the orbiting object is near the periapsis of its orbit, there is a chance that this loop will fail to converge. In such cases, a different root-finding method will be needed.

Find the canonical position vector of the object in its orbit at time t.

x''' = a (cos u − e)
y''' = a sin u √(1−e²)
z''' = 0

Find the true anomaly, θ. We'll use it below when we find the velocity.

θ = arctan( y''' , x''' )

Rotate the triple-prime position vector by the argument of the perihelion, ω.

x'' = x''' cos ω − y''' sin ω
y'' = x''' sin ω + y''' cos ω
z'' = z''' = 0

Rotate the double-prime position vector by the inclination, i.

x' = x''
y' = y'' cos i
z' = y'' sin i

Rotate the single-prime position vector by the longitude of the ascending node, Ω.

x = x' cos Ω − y' sin Ω
y = x' sin Ω + y' cos Ω
z = z'

The unprimed position vector [x,y,z] is the position in heliocentric ecliptic coordinates.

Find the canonical (triple-prime) heliocentric velocity vector.

k = √{ GM / [ a AU (1 − e²) ] }
k is a speed in meters per second.

Vx''' = −k sin θ
Vy''' = k (e + cos θ)
Vz''' = 0

Rotate the triple-prime velocity vector by the argument of the perihelion, ω.

Vx'' = Vx''' cos ω − Vy''' sin ω
Vy'' = Vx''' sin ω + Vy''' cos ω
Vz'' = Vz''' = 0

Rotate the double-prime velocity vector by the inclination, i.

Vx' = Vx''
Vy' = Vy'' cos i
Vz' = Vy'' sin i

Rotate the single-prime velocity vector by the longitude of the ascending node, Ω.

Vx = Vx' cos Ω − Vy' sin Ω
Vy = Vx' sin Ω + Vy' cos Ω
Vz = Vz'

The unprimed velocity vector [Vx,Vy,Vz] is the sun-relative velocity in ecliptic coordinates.

Calculate the position and velocity of the spaceship in its initial orbit at the time of departure

P = 365.257994
m₀ = 9.97935722
m = 6.15348288
u' = 6.15128508
u = 6.15128508
x''' = +0.974604719
y''' = −0.131499998
θ = 6.14906877
x'' = −0.092732158
y'' = +0.979054316
x' = −0.092732158
y' = +0.979054316
z' = 0
xi = −0.092732158
yi = +0.979054316
zi = 0
k = 29788.8217
Vx''' = +3983.20734
Vy''' = +30019.1146
Vx'' = −30140.9504
Vy'' = −2921.69307
Vx' = −30140.9504
Vy' = −2921.69307
Vz' = 0
Vxi = −30140.9504
Vyi = −2921.69307
Vzi = 0

Calculate the position and velocity of Vesta at the time of arrival

P = 1325.30752
m₀ = 3.02910935
m = 0.182899417
u' = 0.200646945
u = 0.200648459
x''' = +2.10361404
y''' = +0.468742457
θ = 0.219245394
x'' = −2.0545179
y'' = +0.651051227
x' = −2.0545179
y' = +0.646009389
z' = +0.080867606
xf = −0.13298229
yf = −2.14957848
zf = +0.080867606
k = 19460.2928
Vx''' = −4232.48025
Vy''' = +20727.481
Vx'' = −6748.92645
Vy'' = −20049.7967
Vx' = −6748.92645
Vy' = −19894.5281
Vz' = −2490.40168
Vxf = +20933.6861
Vyf = −1766.64767
Vzf = −2490.40168

We will refer to a "hypothetical" transfer orbit until we have assured ourselves that it satisfies the condition that the calculated transit time be equal, or very nearly equal, to the required transit time.

The required transit time is the amount of time that the destination object (Vesta, in our example) takes to go from where it is at t₁ to where it is at t₂. This time difference is, of course, t₂−t₁.

The calculated transit time is the amount of time, Δt, that the spaceship takes to travel, along the hypothetical transfer orbit, from where it is at t₁ to the intersection of the hypothetical transfer orbit with the orbit of the destination object.

In general, Δt will differ substantially from t₂−t₁. It is necessary that t₁ and t₂ be chosen such that Δt is nearly equal to t₂−t₁. Once we know that to be the case, we can drop the word "hypothetical," for we will have determined that the transfer orbit does, indeed, exist.

The determination of an elliptical transfer-intercept orbit from a position and time of departure and from a position and time of arrival

At time t₁ a spaceship in free orbit around the sun (i.e. there is no planet nearby) has this state vector:

xi , yi , zi , Vxi , Vyi , Vzi

At time t₂ (such that t₂>t₁) an asteroid in free orbit around the sun (i.e. there is no significant perturbing third mass) has this state vector:

xf , yf , zf , Vxf , Vyf , Vzf

We want to find out whether or not there exists a transfer orbit between the position elements of those two state vectors, such that

x₁ = xi
y₁ = yi
z₁ = zi

x₂ = xf
y₂ = yf
z₂ = zf

Where the subscript 1 denotes "pertaining to the transfer orbit at transfer orbit insertion," and the subscript 2 denotes "pertaining to the transfer orbit when the spaceship crosses the destination object's orbit." (Whether the destination object is actually there at t₂ is a question that we will answer presently.)

r₁ = √[ x₁² + y₁² + z₁² ]
r₂ = √[ x₂² + y₂² + z₂² ]
d = √[ (x₂−x₁)² + (y₂−y₁)² + (z₂−z₁)² ]

We define the integer variable β and permit it to have only the values 1 and 2.

If β=1, an apside (perihelion or aphelion) of the transfer orbit occurs at departure.

If β=2, an apside (perihelion or aphelion) of the transfer orbit occurs at arrival.

β = either 1 or 2
φ = 3 − β
N = (−1)ᵠ

The variables β and φ will usually be subscripts. The variable N is a sign toggle factor.

m : mean anomaly
u : eccentric anomaly
θ : true anomaly

If the apside at the apsidal endpoint of the intended trajectory is the perihelion, then

mᵦ = uᵦ = θᵦ = 0

If the apside at the apsidal endpoint of the intended trajectory is the aphelion, then

mᵦ = uᵦ = θᵦ = π radians

The eccentricity of a conic section, having the sun at a focus, which includes the point of departure and the point of arrival, is found by solving, simultaneously,

The polar equation which relates the heliocentric distance with the true anomaly,

cos θ₂ − cos θ₁ = { [a (1−e²) / r₂ − 1] − [a (1−e²) / r₁ − 1] } / e

The law of cosines,

d² = r₁² + r₂² − 2 r₁ r₂ cos(θ₂−θ₁)

We can eliminate the semimajor axis by recalling that rᵦ is equal to either a(1+e), the transfer orbit aphelion, or to a(1−e), the transfer orbit perihelion and because of the fact that the cosine of either θ₁ or θ₂ is ±1. In general, the semimajor axis can always be eliminated because one or the other endpoints of the intended trajectory occurs at one or the other apside of the transfer orbit. This is why you don't need a third point on the transfer orbit to determine its elements.

After some algebra, we get the eccentricity of the hypothetical transfer orbit.

e = 2 (cos θᵦ) rᵦ (rᵦ−rᵩ) / (rᵩ² − rᵦ² − d²)

The semimajor axis of the hypothetical transfer orbit is found from

a = rᵦ / (1 − e cos θᵦ)

The true anomaly in the hypothetical transfer orbit at the non-apsidal endpoint of the intended trajectory is found as follows:

θᵩ = θᵦ + N arccos{(rᵦ² + rᵩ² − d²) / (2rᵦrᵩ)}

The eccentric anomaly in the hypothetical transfer orbit at the non-apsidal endpoint of the intended trajectory is found as follows:

sin uᵩ = (rᵩ/a) sin θᵩ / √(1−e²)
cos uᵩ = (rᵩ/a) cos θᵩ + e
uᵩ = arctan(sin uᵩ , cos uᵩ)

The mean anomaly in the hypothetical transfer orbit at the non-apsidal endpoint of the intended trajectory is found as follows:

mᵩ = uᵩ − e sin uᵩ

The period of the hypothetical transfer orbit is

P = (365.256898326 days) a¹·⁵

The mean motion in the hypothetical transfer orbit is

μ = 2π/P

For short path trajectories (for which the arc of true anomaly going from departure to arrival is less than π radians), the calculated transit time in the hypothetical transfer orbit is

Δt = (N/μ) [mᵩ − π sin(θᵦ/2)]

Here's the test that determines whether a transfer orbit exists between heliocentric position r₁ at time t₁ and heliocentric position r₂ at time t₂. It is necessary that

Δt ≈ t₂ − t₁

And the match should be a close one, ideally a small fraction of a second. In general, this will not be the case. If the difference in the required and the calculated transit times is unacceptably large, then the spaceship pilot will have to choose either a different departure time, or a different arrival time, or both, and try again.

The procedure being demonstrated here finds elliptical transfer orbits of the short path, by which it is meant that the arc of true anomaly along the intended trajectory, from departure to arrival, is strictly less than π radians. One of the transfer orbit's apsides will occur at either the position of departure or at the position of arrival, but the other apside will not occur at all within the intended trajectory. To be complete about things, we will calculate the time of perihelion passage in the transfer orbit, whether or not the spaceship is ever there.

T = tᵦ − mᵦ/μ

The inclination of the transfer orbit is found from the cross product of the heliocentric position vectors of departure and arrival, r₁ x r₂.

Xn' = y₁ z₂ − z₁ y₂
Yn' = z₁ x₂ − x₁ z₂
Zn' = x₁ y₂ − y₁ x₂

Rn' = √[ (Xn')² + (Yn')² + (Zn')² ]

Xn = Xn' / Rn'
Yn = Yn' / Rn'
Zn = Zn' / Rn'

The vector Rn is a unit normal to the transfer orbit in the direction of the orbit's angular momentum.

i = arccos(Zn)

Having found the components of the vector normal to the transfer orbit (in the direction of the angular momentum), we now use it to find the velocity in the transfer orbit at the apsidal endpoint of the intended trajectory.

Vxᵦ'' = Yn zᵦ − Zn yᵦ
Vyᵦ'' = Zn xᵦ − Xn zᵦ
Vzᵦ'' = Xn yᵦ − Yn xᵦ

Vᵦ'' = √[ (Vxᵦ'')² + (Vyᵦ'')² + (Vzᵦ'')² ]

Vxᵦ' = Vxᵦ'' / Vᵦ''
Vyᵦ' = Vyᵦ'' / Vᵦ''
Vzᵦ' = Vzᵦ'' / Vᵦ''

Vᵦ = √[ (GM/AU) (2/rᵦ − 1/a) ]

Vxᵦ = Vᵦ Vxᵦ'
Vyᵦ = Vᵦ Vyᵦ'
Vzᵦ = Vᵦ Vzᵦ'

Now we find the angular momentum per unit mass in the transfer orbit.

hx = AU (yᵦ Vzᵦ − zᵦ Vyᵦ)
hy = AU (zᵦ Vxᵦ − xᵦ Vzᵦ)
hz = AU (xᵦ Vyᵦ − yᵦ Vxᵦ)

From here, we find the longitude of the ascending node of the transfer orbit.

Ω = arctan( hx , −hy )

Notice that hx is proportional to sin Ω, while −hy is proportional to cos Ω.

We find the argument of the perihelion of the transfer orbit as follows:

cos ω'' = (xᵦ cos Ω + yᵦ sin Ω) / rᵦ

If sin i = 0 then sin ω'' = (yᵦ cos Ω − xᵦ sin Ω) / rᵦ
If sin i ≠ 0 then sin ω'' = zᵦ / (rᵦ sin i)

ω'' = arctan( sin ω'' , cos ω'' )

ω' = ω'' − θᵦ

If ω' ≥ 0 then ω = ω'
If ω' < 0 then ω = ω' + 2π

Continuing with the example

The two known points on the hypothetical transfer orbit are

x₁ = −0.092732158 AU
y₁ = +0.979054316 AU
z₁ = 0

x₂ = −0.13298229 AU
y₂ = −2.14957848 AU
z₂ = +0.080867606 AU

The sides of the sun-departure-arrival triangle are

r₁ = 0.98343612 AU
r₂ = 2.15520567 AU
d = 3.129936551 AU

We are given that the apoapsis of the hypothetical transfer orbit occurs at the arrival position, so

β = 2
φ = 1
N = −1
m₂ = u₂ = θ₂ = π radians

The eccentricity and the semimajor axis of the hypothetical transfer orbit are

e = 0.37484849
a = 1.56759505 AU

The true, eccentric, and mean anomalies in the hypothetical transfer orbit at the non-apsidal endpoint of the intended trajectory (i.e. the departure position) are

The period and mean motion of the hypothetical transfer orbit are

P = 716.884602 days

The calculated and required transit times in the hypothetical transfer orbit, from departure to arrival, are

Δt = 350.698335 days
t₂−t₁ = 350.69833375 days

Subject to roundoff error, the difference is about one-tenth of a second. That's close enough. The transfer orbit exists.

The time of perihelion passage in the transfer orbit (although the spaceship is never there) is

T = JD 2457923.256033 = 18h 8m 41s UTC on 18 June 2017

Find the unit normal vector to the plane of the transfer orbit

Xn' = +0.079173779
Yn' = +0.0074990276
Zn' = +0.329531936

Rn' = 0.338992654

Xn = +0.233556030
Yn = +0.0221215048
Zn = +0.972091673

The transfer orbit's inclination to the ecliptic

i = 13.56812324°

Find the velocity in the transfer orbit at the apsidal endpoint of the intended trajectory

Vx₂'' = +2.091376254
Vy₂'' = −0.148158093
Vz₂'' = −0.499105248

V₂'' = 2.155205676

Vx₂' = +0.970383605
Vy₂' = −0.068744295
Vz₂' = −0.231581261

V₂ = 16041.367805 m/s

Vx₂ = +15566.280326 m/s
Vy₂ = −1102.752513 m/s
Vz₂ = −3714.880181 m/s

The angular momentum per unit mass

hx = +1.207943483ᴇ15 m²/s
hy = +1.144116363ᴇ14 m²/s
hz = +5.027623568ᴇ15 m²/s

The transfer orbit's longitude of the ascending node

Ω = 95.41068849°

Find the transfer orbit's argument of the perihelion

cos ω'' = −0.987126840
sin ω'' = +0.159939380
ω = 350.79662233°

Keplerian elements of the transfer orbit

a = 1.56759505 AU
e = 0.37484849
i = 13.56812324°
Ω = 95.41068849°
ω = 350.79662233°
T = JD 2457923.256033

Now that you have the elements of the transfer orbit, you can calculate the changes-of-velocity needed for transfer orbit insertion (departure) and for matching velocity with the target asteroid at arrival.

Calculation of the delta-vees for departure and for arrival

When we reduce the elements of the transfer orbit with the time of departure, t₁, we find that the velocity of the spaceship in the transfer orbit is

Vx₁ = −34166.4329 m/s
Vy₁ = −1690.83202 m/s
Vz₁ = +8247.34992 m/s

The velocity of the spaceship in its initial orbit at t₁ was

Vxi = −30140.9504 m/s
Vyi = −2921.69307 m/s
Vzi = 0.0 m/s

So the change of velocity required at departure for transfer orbit insertion is

ΔVx₁ = −4025.4825 m/s
ΔVy₁ = +1230.8611 m/s
ΔVz₁ = +8247.3499 m/s

ΔV₁ = 9259.4983 m/s

The velocity of Vesta, when it is intercepted by the spaceship, is

Vxf = +20933.6861 m/s
Vyf = −1766.64767 m/s
Vzf = −2490.40168 m/s

When we reduce the elements of the transfer orbit with the time of arrival, t₂, we find that the velocity of the spaceship in the transfer orbit is

Vx₂ = +15566.2801 m/s
Vy₂ = −1102.75259 m/s
Vz₂ = −3714.88014 m/s

So the change of velocity required of the spaceship at arrival to match velocity with Vesta is

ΔVx₂ = +5367.4060 m/s
ΔVy₂ = −663.8951 m/s
ΔVz₂ = +1224.4785 m/s

ΔV₂ = 5545.1917 m/s

Remember that all of the unprimed vectors in this tutorial are referred to ecliptic coordinates. If you want them in celestial coordinates (so that you can use a star chart to show you the right ascension and declination in which to point the nose of your spaceship when you apply thrust), you'll still have that to do.

A check on the accuracy of the method by a numerical evolution of the state vector

As calculated from the Keplerian elements of the transfer orbit, at time t₁=JD 2457931.0, the spaceship's heliocentric state vector is

x₁ = −0.092732158 AU
y₁ = +0.979054316 AU
z₁ = 0
Vx₁ = −34166.4329 m/s
Vy₁ = −1690.83202 m/s
Vz₁ = +8247.34992 m/s

As calculated from the Keplerian elements of the transfer orbit, at time t₂ = JD 2458281.69833375, the spaceship's heliocentric state vector is

x₂ = −0.13298229 AU
y₂ = −2.14957848 AU
z₂ = +0.080867606 AU
Vx₂ = +15566.2801 m/s
Vy₂ = −1102.75259 m/s
Vz₂ = −3714.88014 m/s

The transit time of the spaceship in the transfer orbit is

t₂−t₁ = 30300336.036 sec

If we take the state vector at t₁ and numerically walk it forward in time by 1 second intervals for 30300336 seconds, we get this result.

x = −0.132983124 AU
y = −2.149579643 AU
z = +0.080867833 AU
Vx = +15566.27354 m/s
Vy = −1102.76889 m/s
Vz = −3714.87818 m/s September 13th, 2020 #2 Tony Boone Senior Member   Join Date: Sep 2017 Posts: 774  ...... __________________ Free Whiteystine. Only dogs wear a muzzle. 😷 September 13th, 2020 #3 Kosher Clown Junior Member   Join Date: May 2019 Posts: 149   September 13th, 2020 #4 Nikola Bijeliti Sex: Male   Join Date: Sep 2017 Posts: 770 Blog Entries: 21  That's a very interesting post, but I'm not sure how many people here could actually make use of that information. Does Elon Musk read VNN Forum? __________________ All these ideasare chained to the existence of men, to who[m]they owe their existence. Precisely in this case the preservation of these definite races and men is the precondition for the existence of these ideas. --Adolf Hitler

 Thread Show Printable Version Email this Page Display Modes Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

All times are GMT -5. The time now is 10:16 PM.
Page generated in 0.10669 seconds. 